MAJOR GARRI PROCESSING MACHINES AND PRICES (INCLUDING PICTURES)



A mechanical peeler under fabrication



*Prices are updates to current prices*


Yeah, it’s me, the garriguy!

Today, I will discuss about the machinery involved in garri processing and their prices, as of today. If I give you prices today and you come back five years later to tell me shebi na one price I call am, I go curse you ni o... Lol


On a business mode, the prices here today may change anytime based on few understandable and familiar factors…

1. Dollar to naira exchange rate because the stainless steel is imported. Ajaokuta to gree wake up! Most prices quoted today are just half of what the price was, few years ago.

2.  Dollar to naira exchange rate


  3.  Dollar to naira exchange rate…lol

Anyways, I believe the message is already assimilated. This implies that the prices may be even lower or higher.

BEFORE I PROCEED, IF YOU WANT TO KNOW EVERYTHING ABOUT GARRI PROCESSING, KINDLY REQUEST FOR MY MANUAL FOR JUST 1,500 OR THE UPDATED ON FOR JUST 2,000.

THE UPDATED MANUAL CONTAINS PROCESSES OF GARRI, CASSAVA STARCH AND CASSAVA FLOUR, BOTH IN LARGE QUANTITY AND SMALL SCALE. PRICES OF THE MACHINERIES ARE ALSO INCLUDED.

YOU CAN PAY VIA BANK TRANSFER OR VIA RECHARGE CARD. TABLE OF CONTENTS IS ATTACHED WITH ONE OR TWO TESTIMONIES.






ALSO, understand that I am not a fabricator- I AM THE GARRIGUY, YOUR CONSULTANT. But I represent credible fabricators that are tested and trusted. I have just two of them, with successful track records.

IF YOU WOULD LIKE ME TO TAKE YOU TO ANY OF THESE FABRICATORS TO VISIT THE FACTORY, BE READY TO TAKE CARE OF MY TRANSPORTATION FARE FROM WHERE I RESIDE TO OUR PLACE OF MEET. I HAVE FABRICATORS IN BOTH OYO STATE AND OSUN STATE.


For garri production, the three major machines needed are


1.   GRATER   
2. PRESSER 
3. FRYER
4. SIFTER

GRATERS

The grater are of two different capacities, measured by how many tonnage it could process in an hour.

A 2ton/hour grater may come with a big 8hp diesel Lister engine, 165 diesel engine or an 8hp petrol engine. As a consultant, your intended output will determine which one I would proffer

1. 2tons/hr STAINLESS STEEL  machine with an 8hp big Lister engine costs 450,000. This Lister engine is the same used for generators or block making in Nigeria.


A big Lister diesel engine




2.  2tons/hr STAINLESS STEEL  Grating machine with an 8hp Petrol engine costs 320,000

3.  1ton/hr STAINLESS STEEL  Grating machine with a 165 diesel engine, costs 260,000


A 165 diesel engine


4. 2tons/hr NON-STAINLESS STEEL Grating machine with a 8hp petrol engine costs 220,000

The choice to have go stainless or not is an individual and dream-related. You can call me for free advice via PHONE/EMAIL /WHATSAPP/IMO/GOOGLE DUOS      +2347035593128



PRESSERS


Pressers are majorly of one type. Capable of pressing 10 bags at a time and you can press and fry within few hours, other than the 48hrs the old ones will give you.


THOUGH, ONE OF MY FABRICATORS CAN DO A SMALLER ONE FOR LESS.


1. Pressers with ability to press more than 10bags at a time and capable of pressing and frying in the same day with a 30 ton hydraulic jack. Cost is 110,000.


2.  Pressers with ability to press 5bags at a time and capable of pressing and frying in the same day with a 20 ton hydraulic jack. Cost is 60,000.




FRYERS


Fryers are of two major types. Manual and mechanical.
The manual fryers are a remake of the old ones, but more modern, convenient and effective. With it being stainless steel, it has many edge against the old conventional ones. It gets heated quickly, uses less fuel and fry more garri than the old ones.


MANUAL FRYERS

The manual are of two sizes.

1.  Big size. 4 X 8 feet. STAINLESS STEEL. Capable of frying 25kg in 30 minutes. Price is 110,000

2. Small size.4 X 4 feet. STAINLESS STEEL. Capable of frying 10kg in 30 minutes. Price is 65,000

3. Old ones, but more bigger and NON-STAINLESS. 10kg in 50 minutes. Price is 10,000.

4X8 ft manual fryers
4X4 ft manual fryer



MECHANICAL FRYERS

Also of different sizes. ALL STAINLESS STEEL. The decision to use either firewood or gas depends on you and other factors. Call me for free advice.


1.  Big size, 50kg in 35 minutes. Price is 450,000


2. Small size, 25kg in 35 minutes. Price is 350,000

 A stainless steel mechanical fryer





SIFTERS

Sifters are used to either sift the cassava cakes before frying or after. The decision to sift before or after frying depends on one major factor- THE TYPE OF GARRI YOU INTENDED TO PRODUCE. If you want to how to produce various types of garri and the best time to sift or no, contact me on how to get the manual.  

A sifter is 180,000. Stainless steel and 130,000 for non stainless steel.


A stainless steel mechanical Sifter



MECHANICAL PEELING MACHINE
A peeling machine is necessary for large scalers. Production a large ton of cassava daily may require you get a mechanical peeling machine. The cost depends on the size..

500,000 for a 2.5tons/hr 
350,000 for a 1.5tons/hr

CALL/WHATSAPP/IMO/GOOGLE DUO/ALLO  +2347035593128
Email: garriguy007@gmail.com







Comments

  1. Very informative and timely. God bless your business.

    ReplyDelete
  2. Thank you for the comment, Sir.
    I believe you will enjoy the manual too.

    ReplyDelete
  3. Sir, in all you are genius, the is too good know. God bless you hear from soon.

    ReplyDelete
  4. i would like to know if these prices are still the same till date

    ReplyDelete
  5. please how do i get the ebook?

    ReplyDelete
  6. Are the information provided about the same as now especially as regards prices?

    ReplyDelete
  7. Very very informative....keep it up.

    ReplyDelete

Post a Comment